Trim

trim-1--before
^

trim-1--before

Before

trim-2--after
^

trim-2--after

After

trim-3--before
^

trim-3--before

Before

trim-4--after
^

trim-4--after

After
This job took: 10 hours
Disclaimer: Hours for this type of project are approximate as jobs vary.

This customer wanted an old barn plank mounted as a shelf.
^

trim-1--before

Before

This customer wanted an old barn plank mounted as a shelf.

trim-2--after
^

trim-2--after

After
This job took: 2 hours
Disclaimer: Hours for this type of project are approximate as jobs vary.

Due to the slight diffference in floor heights, we had to fabricate a threshold/transition strip.
^

trim-1--before

Before

Due to the slight diffference in floor heights, we had to fabricate a threshold/transition strip.

trim-2--after
^

trim-2--after

After
This job took: 4 hours
Disclaimer: Hours for this type of project are approximate as jobs vary.

Along with custom trimming the entire 2300-square-foot house, we fabricated this king post in keeping with the federal-style architecture.
^

trim-1

After

Along with custom trimming the entire 2300-square-foot house, we fabricated this king post in keeping with the federal-style architecture.

We incorporated the original transom over the bathroom door.
^

trim-2

After

We incorporated the original transom over the bathroom door.

trim-4
^

trim-4

After

trim-5
^

trim-5

After
This job took: 112 hours
Disclaimer: Hours for this type of project are approximate as jobs vary.

This refrigerator panel was water-stained from a leak in a supply tube.
^

trim-1--before

Before

This refrigerator panel was water-stained from a leak in a supply tube.

trim-2--after
^

trim-2--after

After
This job took: 3 hours
Disclaimer: Hours for this type of project are approximate as jobs vary.

Note the gap between the ceiling and the brick wall. This gap was allowing heat to escape.
^

ceiling-trim-01

Before

Note the gap between the ceiling and the brick wall. This gap was allowing heat to escape.

We sealed the crack with spray-foam insullation.
^

ceiling-trim-02

During

We sealed the crack with spray-foam insullation.

We trimmed out this area using 3.5 inch crown molding.
^

ceiling-trim-03

After
This job took: 8 hours
Disclaimer: Hours for this type of project are approximate as jobs vary.

We trimmed out this area using 3.5 inch crown molding.

Here we opened up the wall and left the bottom half for a room divider.
^

carpentry-pass-through-before

Before

Here we opened up the wall and left the bottom half for a room divider.

We capped the wall with 1 x 8 and custom fabricated the column.
^

carpentry-pass-through-after

After
This job took: 16 hours
Disclaimer: Hours for this type of project are approximate as jobs vary.

We capped the wall with 1 x 8 and custom fabricated the column.